Name: Hi Bond
Address: 246, G.I.D.C., Phase II, Aji Industrial Area, Rajkot, 360003, United States
Telephone: +91-281-2387678

Our Product Materials

Cars / Trucks / Tractors / Air Compressors / Pumps / Diesel Engines Agricultural – Machineries / Marine Engines / Locomotive Engines / Heavy Earth Movers › Light Commercial Vehicles › Refrigerator Compressors › Building and Construction Machineries › General Engineering

Good quality parts make for great machines, and excellent business.

ALLOY FORM	SAE REFERENCE	METALLOGRAPHS	FEATURES AND APPLICATIONS
CAST BABBITT	SAE - 14		This lead base babbitt is soft, excellent embeddability for relative applications, minimum lubrication, good resistance, low fatigue resistance and has been used for many years in lower load application.
	SAE - 15		This lead base babbitt has a good bearing performance, good embeddability and has been used for many years in lower lead application.
	SAE - 12		This tin base babbitt has good sliding properties, conformability and high toughness; good embeddability suitable for high sliding velocities in the hydrodynamic range, mean load, impact stress at low frequency insensitive to reversed bending stress.
CAST COPPER LEAD	SAE - 793		Increased hardness and wear resistance. Increasing the load content improves the tolerance of poor alignment and intermittent lubrication.
	SAE - 792		This material is best suited for bushings and washers subjected to high impact and vibratory loads. In most cases. it operates best with hardened shaft.
	SAE - 49		High fatigue strength, normally platted with an overlay when used in bearing application and in this from may be operated with hard or soft shafts, susceptible to corrosion by degraded oil when not overlay plated.
	SAE - 794		High fatigue strength and shock resistance, suitable for high speed shafts, oscillanting or rotating motion hard shaft desirable, normally overlay plated when used in bearing application.
SINTERED COPPER LEAD	SAE - 792		This material is best suited for bushings and washers subjected to high impact and vibratory loads. In most cases. it operates best with hardened shaft.
	SAE - 49		This is a bearing material designed exclusively for high load. The material is plated with a unique trimetal overlay and nickel dam.
	SAE - 794		This material is employed for bushings and thrust washers applications subjected to intermediate impacts and vibratory loads. It has certain degree of embeddability and it is suitable for higher speed of load.
CLAD ALUMINIUM	SAE - 783		This aluminium clad has good fatigue resistance, good surface behavior, excellent corrosion resistance, intermediate to heavy load, main con.rod bearing, thrust washer and wrapped bushes for hard and soft shafts.
CAST ALUMINIUM (SOLID)	SAE - 770		This material having a high fatigue strength, good corrosion resistance and conformability is used with hard shafts.

ALLOY REFERENCE
ALLOY FORM	SAE REFERENCE	Pb (LEAD )	Sn (TIN)	Cu (COPPER)	Sb (ANTIMONY)	As (ARSENIC)	Ni (NICKEL)	Al (ALUMINIUM)	Si (ILICON)	Zn (ZINK)	Fe (IRON)
CAST BABIT
LEAD BASED WHITE METAL	SAE - 14	BALANCE	8.0 - 10.0	0.8 - 1.20	13.0 - 15.0	0.4 - 0.7	0.05 - 0.15
LEAD BASED WHITE METAL	SAE - 15	BALANCE	0.9 - 1.25	0.6 MAXIMUM	14.5 - 15.5	0.8 - 1.2
TIN BASED WHITE METAL	SAE - 12	0.35 Maximum	BALANCE	2.5 - 3.5	6.5 - 7.5
CAST COPPER LEAD
COPPER LEAD	SAE - 793	8 - 10	4 - 6	BALANCE	0.5 MAXIMUM		2.0 MAXIMUM			2.0 MAXIMUM
COPPER LEAD	SAE - 792	9 - 11	9 - 11	BALANCE	0.5 MAXIMUM		0.5 MAXIMUM			0.75 MAXIMUM
COPPER LEAD		18 - 24	1.5 - 3.0	BALANCE			1.5 MAXIMUM			1.00 MAXIMUM	0.70 MAXIMUM
COPPER LEAD		19 - 24	1.8 - 2.8	BALANCE							0.25 MAXIMUM
COPPER LEAD	SAE - 49	21 - 27	1.75 -2.75	BALANCE
COPPER LEAD	SAE - 794	23 - 27	2 - 4	BALANCE
SINTERED COPPER LEAD
COPPER LEAD	SAE - 792	9 - 11	9 - 11	BALANCE	0.5 MAXIMUM		0.5 MAXIMUM			0.75 MAXIMUM
COPPER LEAD	SAE - 49	21 - 27	1.75 -2.75	BALANCE
COPPER LEAD	SAE - 794	23 - 27	2 - 4	BALANCE
CLAD ALUMINIUM
ALUMINUM TIN	SAE - 783		17.5 -22.5	0.7 - 1.3				BALANCE	0.5 MAXIMUM		0.5 MAXIMUM
CAST ALUMINIUM ( SOLID )
ALUMINUM TIN	SAE - 770		5.5 -7.5	0.7 - 1.3			0.7 - 1.3	BALANCE	0.7 MAXIMUM		0.7 MAXIMUM
OVERLAY PLATING
LEAD TIN	SAE - 191	BALANCE	8 - 12
LEAD TIN COPPER	SAE - 192	BALANCE	8 - 12	2 - 3
STEEL REFERENCE
STEEL	SAE REFERENCE	C	Mn	P	S
MILD STEEL	SAE - 1008	0.1 MAXIMUM	0.3 - 0.5	0.04 MAXIMUM	0.05 MAXIMUM
MILD STEEL	SAE - 1010	0.05 - 0.13	0.55 MAXIMUM	0.04 MAXIMUM	0.05 MAXIMUM